| The fear of theft and burglary always annoys many people. When lock and keys become
                            less safe, one can seek the help of electronic security systems. Such a portable
                            security system is described here. This electronic setup auto activated whenever
                            the intruder enters to the unauthorized no entry area. It auto activate the landline
                            number and redial the last dialed number from the conventional telephone. All we
                            need is to do minor changes to activate this telephone as it works as to become
                            auto dialer circuit. Thus whenever the intruder enters to the area, it activates
                            the sensor circuit of either sound activation or infrared light beam obstruction
                            circuit, the redial circuit become active and give a ring tone to the receiving
                            end. It may be a mobile phone or any landline phone or even police control room. | 
                    
                        | AUTOMATIC ROOM LIGHT CONTROLLER WITH BIDIRECTIONAL VISITOR COUNTER PROJECT FOR ELECTRICAL ENGINEERING
                                Project Working:- | This Project ―Automatic Room Light Controller with Visitor Counter using Microcontroller
                            is a reliable circuit that takes over the task of controlling the room lights as
                            well us counting number of persons/ visitors in the room very accurately. When somebody
                            enters into the room then the counter is incremented by one and the light in the
                            room will be switched ON and when any one leaves the room then the counter is decremented
                            by one. The light will be only switched OFF until all the persons in the room go
                            out. The total number of persons inside the room is also displayed on the seven
                            segment displays. The microcontroller does the above job. It receives the signals from the sensors,
                            and this signal is operated under the control of software which is stored in ROM.
                            MicrocontrollerAT89S52 continuously monitor the Infrared Receivers, When any object
                            pass through the IR Receiver's then the IR Rays falling on the receiver are obstructed
                            , this obstruction is sensed by the Microcontroller.
 |